The procedure of garage door opener installation is typically simple, though suppliers and parts may differ. Since these openers are usually set up by the customer, installation directions are clear. Parts are identified to make sure very easy assembly. However, for proper installation, you can also discover a certified company site such as http://philadelphiagaragedoorpro.com/garage-door-openers-philadelphia/ and their experts can help you what exactly you need.

This process should only take a very little amount of time and your opener will certainly be totally functional.

Set up the Opener

Outline all parts as the instructions indicate. Parts are usually stamped or might contain lettered sticker labels. The initial step is to set up the rail. Following you will attach it to the opener’s electric motor head. As soon as the opener has actually been entirely put together, the final step is installation.

Affix the Rail to the Header


To do this action, you will require an 8-foot ladder. Increase your garage and mark it at the highest point. Close the garage door.

At the website of the mark, measure up 2 inches. The bottom of the header bracket will certainly be put here, over the center of the door. Location the header bracket on at the second mark and safeguard it with 2 wooden lag bolts.

With the electric motor end on the flooring and the rail inside the header brace, align the opener setting up on the door. You will need to align the holes on the rail with the header brace. Move a clevis pin with the bracket and rail to attach.

Mount the Motor


Area the ladder at the back of the door tracks, in the center. Area the motor on the ladder. Gradually, raise the garage door until it comes in contact with the door. As you continue to open the door, the electric motor setting up will be taken off the motor. When the door is totally open, position a 2×4 between the opener rail and the door.

To do your garage door opener installation correct, you will need to secure the wall mounts to the motor head right into the ceiling things. Using the directions and hangers offered, affix them to the ceiling with lag screws. After connecting the hangers, raise the electric motor head and screw it to the ceiling hangers. Get more info about
automatic garage door opener installation here.

Comments are closed.

Post Navigation